|
Products Construction | Mining | Trucking | Pulp & Paper | Manufacturing
Construction Without
the right lubricants, even the mightiest machines are no match for
Mother Earth.
Which
is why you should feed yours Texaco Ursa Super Plus' engine oil. It
meets the toughest OEM and API specs that exist. In fact, while others
reformulated to meet API's new CF-4 and SH requirements, Ursa Super Plus
was already there. The translation: You can't top Ursa Super Plus for
fighting the deposits, dirt and sludge that can bury productivity.
That's why it's the flagship of Texaco's Construction Lubricants Program
- a line of products and services from Texaco Starplex 2 greases to our
TEXCHEK Oil Analysis Program. So next time your machines are out
snacking on a mountain of earth, make sure they don't bite the dust.
Contact your local Texaco Lubricants Distributor or call 1-800-782-7852. Texaco
features a complete line of outstanding products suitable for a wide
variety of applications in the construction industry. These products
meet or exceed most OEM and industry requirements for their intended
uses.
Ursa
Super Plus Engine Oil
Our
featured product, Ursa
Super Plus Engine Oil, is the top choice for gasoline and diesel
engines operating across a wide temperature range. Ursa Super Plus
engine oil is suitable for use in virtually every heavy-duty gasoline or
diesel engine. It is available in SAE viscosity grades 15W-40, 10W-30,
10W, 20, 30, 40 and 50. Havoline
Automatic Transmission Fluids
Havoline
Automatic Transmission Fluid MERCONŽ/DEXRONŽ-III
is approved against Ford MERCONŽ, GM DEXRONŽ-III and Allison C-4, and
can be used in applications where Caterpillar TO-2 fluids are
recommended. Havoline
Automatic Transmission Fluid Type F
meets the Ford specification M2C33-F. Havoline
Automatic Transmission Fluid ATF +3 is
approved against Chrysler specification MS-7176D. These
products also find application as the operating fluid for high speed,
high pressure hydraulic equipment, particularly those operated at low
ambient temperatures, screw type flood-lubricated air compressors, and
certain power steering systems. TDH
Oil
This
specially designed fluid offers all characteristics necessary to meet
the combined requirements of a transmission differential-hydraulic oil. TDH
Oil can be used in many hydraulic applications found in the
construction industry. Multigear
EP
Multigear
EP 80W-90 and 85W-140
are premium-quality gear oils that offer exceptional thermal stability
and seal compatibility. They meet or exceed the requirements of
MIL-L-2105D, API GL-3, GL-4 and GL-5 and Mack GO-J. Texaco
Anti-Freeze/Coolants
Texaco
Extended Life Anti-Freeze/Coolants
Texaco
Extended Life Coolant System is a revolutionary new breakthrough in
heavy duty coolant/antifreeze technology. The patented inhibitors in
Texaco Extended Life Coolants offer coolant system protection for
600,000 miles of on-road use (12,000 hours off-highway use) with the
addition of only one Texaco Extender package at 300,000 miles or 6,000
hours. Texaco Extended Life Coolants do not contain silicates, borate's,
phosphates, nitrates or amines traditionally found in fully formulated
heavy duty coolants. Based
on Texaco's patented carboxylate technology, the system of coolant
products includes:
Texaco
Extended Life Coolant System is specifically formulated for heavy duty
diesel and natural gas engines. It is also suitable for use in mixed
fleet applications. Texaco
Traditional Anti-Freeze/Coolant
Texaco
Anti-Freeze/Coolant is a superior quality, single phase, ethylene glycol
based product. It is a low silicate, all-purpose coolant designed for
use in both heavy duty diesel and automotive engines, particularly those
containing aluminum alloys.
Starplex
and Starplex Moly Greases
Texaco's
series of premium lithium complex, extreme-pressure greases, Starplex
greases are designed for heavy-duty equipment and automotive uses. They
provide good mechanical and oxidative stability, resist water, help
prevent rust and perform well in both high and low temperatures, where
mineral-oil based greases are preferred. Starplex
Moly containing molybdenum disulfide is especially suitable for
construction equipment applications. Rando
Oil HDZ Series
The
Rando
HDZ series of multigrade hydraulic oils is ideal where wide
variations of ambient and system temperatures occur. These oils are
shear-resistant and offer the performance characteristics of
premium-grade antiwear hydraulic oils. Biostar
Hydraulic Fluids
Biostar
Hydraulic Fluids
are biodegradable, vegetable-based fluids that offer excellent
protection against wear in systems where there is a possibility of
environmental contamination. For
information on the safe handling and use of these products, please refer
to the U.S.Material
Safety Data Sheets. For additional information and availability of
product, please call 1-800-782-7852.
It's
the weekend. Do you know what your equipment is doing?
If
your equipment doesn't have the protection of Hydragear EP, it could be
fighting an expensive battle with rust and corrosion. Texaco
features a complete line of outstanding products suitable for a wide
variety of applications in the mining industry. These products meet or
exceed most OEM and industry requirements for their intended uses.
Ursa
Super Plus Engine Oil
Our
featured product, Ursa
Super Plus Engine Oil, is the top choice for gasoline and diesel
engines operating across a wide temperature range. Ursa Super Plus
engine oil is suitable for use in virtually every heavy-duty gasoline or
diesel engine. It is available in SAE viscosity grades 15W-40, 10W-30,
10W, 20, 30, 40 and 50. TDH
Oil
TDH
Oil
is a specially designed fluid which offers all characteristics necessary
to meet the combined requirements of a
transmission-differential-hydraulic oil. TDH Oil can be used in many
hydraulic applications found in the construction industry. Havoline
Automatic Transmission Fluids
Havoline
Automatic Transmission Fluid MERCONŽ/DEXRONŽ-III
is approved against Ford MERCONŽ, GM DEXRONŽ-III and Allison C-4, and
can be used in applications where Caterpillar TO-2 fluids are
recommended. Havoline
Automatic Transmission Fluid Type F
meets the Ford specification M2C33-F. Havoline
Automatic Transmission Fluid ATF +3 is
approved against Chrysler specification MS-7176D. These
products also find application as the operating fluid for high speed,
high pressure hydraulic equipment, particularly those operated at low
ambient temperatures, screw type flood-lubricated air compressors, and
certain power steering systems. Aquagear
EP
Aquagear
EP
series consists of multigrade, extreme pressure industrial type gear
lubricants. It is specially formulated to perform in gear drive units
where rusting, due to severe water contamination is a problem. Rando
HD
Rando
HD is
a premium grade, anti-wear hydraulic oil series. It is specifically
designed to contribute to the long life of hydraulic equipment. In
service Rando HD provides:
Rando
HD meets or exceeds leading manufacturers' hydraulic requirements. Starplex
Greases
Starplex
greases
are premium lithium complex soap, multipurpose, extreme-pressure (EP)
greases compounded with a highly refined paraffinic base oil. They are
designed for heavy duty equipment and automotive uses. In
service Starplex greases provide:
Texaco
Anti-Freeze/Coolants
Texaco
Extended Life Anti-Freeze/Coolants
Texaco
Extended Life Coolant System is a revolutionary new breakthrough in
heavy duty coolant/antifreeze technology. The patented inhibitors in
Texaco Extended Life Coolants offer coolant system protection for
600,000 miles of on-road use (12,000 hours off-highway use) with the
addition of only one Texaco Extender package at 300,000 miles or 6,000
hours. Texaco Extended Life Coolants do not contain silicates, borate's,
phosphates, nitrates or amines traditionally found in fully formulated
heavy duty coolants. Based
on Texaco's patented carboxylate technology, the system of coolant
products includes:
Texaco
Extended Life Coolant System is specifically formulated for heavy duty
diesel and natural gas engines. It is also suitable for use in mixed
fleet applications. Texaco
Traditional Anti-Freeze/Coolant
Texaco
Anti-Freeze/Coolant is a superior quality, single phase, ethylene glycol
based product. It is a low silicate, all-purpose coolant designed for
use in both heavy duty diesel and automotive engines, particularly those
containing aluminum alloys.
For
information on the safe handling and use of these products, please refer
to the U.S.
Material Safety Data Sheets. For additional information and
availability of product, please call 1-800-782-7852.
How
does an oil company log a forest for 40 years and still keep it
pristine?
It
lets Wimer Logging do all the heavy lifting, but not without Texaco Ursa
engine oils in its equipment. "I wouldn't use anything else,"
says company president Don Wimer. "Ursa works as hard out here as
any of my best loggers." Over 45 million miles of fleet testing
says our engine oil will make the cut for you, too. Contact your local
Texaco Lubricants Distributor or call 1-800-782-7852. Texaco
features a complete line of outstanding products suitable for a wide
variety of applications in the trucking industry. These products meet or
exceed most OEM and industry requirements for their intended uses.
Ursa
Premium TDX Diesel Engine Oil
Ursa
Premium TDX Diesel Engine Oil
has been formulated exclusively for heavy-duty diesel engines. Its
diesel-specific formula delivers high performance advantages.
Uncompromising diesel performance that assures maximum engine wear
protection, in addition to extended drain interval capabilities beyond
conventional mixed-fleet oils. It is available in four viscosity grades,
SAE 10W-30, SAE 15W-40, SAE 30 and SAE 40. It meets or exceeds the
requirements of virtually every heavy-duty diesel application around the
world. Ursa
Super Plus Engine Oil
The
top choice for gasoline and diesel engines operating across a wide
temperature range, Ursa
Super Plus engine oil is suitable for use in virtually every
heavy-duty diesel and gasoline engine. It is available in SAE viscosity
grades 15W-40, 10W-30, 10W, 20, 30, 40 and 50. Transmission
and Drive Train Oil
Texaco's
Transmission
and Drive Train Oil SAE 10W, 30 and 50 meet the stringent
performance requirements of the Caterpillar TO-4 specification, and the
SAE 10W and 30 have Allison C-4 approval. Multigear
EP
Multigear
EP 80W-90 and 85W-140
are premium-quality, mineral-based gear oils that offer exceptional
thermal stability and seal compatibility. They meet or exceed the
requirements of MIL-L-2105E, API GL-3, GL-4 and GL-5 and Mack GO-J. Syn-Star
GL and Syn-Star TL Lubricants
Syn-Star
GL
and Syn-Star
TL are synthetic-based, wide-range, multigrade automotive gear
lubricants that offer exceptional thermal stability and seal
compatibility These lubricants can provide improved fuel economy for
overall savings. They meet Eaton's extended drain requirements. Starplex
Greases
Texaco's
series of premium lithium complex, extreme-pressure greases, Starplex
greases are designed for heavy-duty equipment and automotive uses.
They provide good mechanical and oxidative stability, resist water, help
prevent rust and perform well in both high and low temperatures, where a
mineral-oil based grease is preferred. Starfak
Grease
Starfak
is
a synthetic grease recommended in trailer wheel hub applications, where
gear oils are normally recommended but tend to leak. This product also
is recommended in centralized greasing systems. Texaco
Anti-Freeze/Coolants
Texaco
Extended Life Anti-Freeze/Coolants
Texaco
Extended Life Coolant System is a revolutionary new breakthrough in
heavy duty coolant/antifreeze technology. The patented inhibitors in
Texaco Extended Life Coolants offer coolant system protection for
600,000 miles of on-road use (12,000 hours off-highway use) with the
addition of only one Texaco Extender package at 300,000 miles or 6,000
hours. Texaco Extended Life Coolants do not contain silicates, borate's,
phosphates, nitrates or amines traditionally found in fully formulated
heavy duty coolants. Based
on Texaco's patented carboxylate technology, the system of coolant
products includes:
Texaco
Extended Life Coolant System is specifically formulated for heavy duty
diesel and natural gas engines. It is also suitable for use in mixed
fleet applications. Texaco
Traditional Anti-Freeze/Coolant
Texaco
Anti-Freeze/Coolant is a superior quality, single phase, ethylene glycol
based product. It is a low silicate, all-purpose coolant designed for
use in both heavy duty diesel and automotive engines, particularly those
containing aluminum alloys.
For
information on the safe handling and use of these products, please refer
to the U.S.
Material Safety Data Sheets. For additional information and
availability of product, please call 1-800-782-7852.
Texaco
features a complete line of outstanding products suitable for a wide
variety of applications in the Pulp and Paper industry. These products
meet or exceed most OEM and industry requirements for their intended
uses.
Rando
HD
Rando
HD
is a premium grade, anti-wear hydraulic oil series. It is specifically
designed to contribute to the long life of hydraulic equipment. In
service Rando HD provides:
Rando
HD meets or exceeds leading manufacturers' hydraulic requirements. Regal
R&O
Regal
R&O
oils are turbine-quality circulating and compressor oils formulated to
perform over a wide range of operating temperatures. Regal R&O oils
are recommended in circulating systems where water contamination is a
problem. Regal R&O heavier grades meet the AGMA R&O
specifications and are recommended for gear units requiring these
specifications. PMO
Premium Oils
PMO
Premium oils
are low-ash paper machine oils and contains anti-wear additives. In
service PMO Premium provides:
Starplex
Greases
Starplex
greases
are premium lithium complex soap, multipurpose, extreme-pressure (EP)
greases compounded with a highly refined paraffinic base oil. They are
designed for heavy duty equipment and automotive uses. In
service Starplex greases provide:
Starfak
Greases
Starfak
greases are
premium quality greases which contain a synthetic base fluid and a
lithium complex soap thickener. They are recommended in severe
applications with high loads or elevated temperatures. Starfak
PM greases are undyed and are specifically recommended in paper machine
applications. Coupling
Greases
Coupling
Greases
are a lithium thickened product which offers superior resistance to oil
separation by centrifugation. It is also suitable for use in all types
of flexible couplings, as defined by AGMA Coupling Grease Specifications
CG-1, CG-2 and CG-3. Coupling Greases has a consistency which overlaps
the NLGI grades 0 and 1. Meropa
Lubricants
Meropa
lubricants
are industrial gear lubricants that work hard in enclosed gear boxes and
in many circulating systems to resist thickening caused by high
temperatures. Meropa is rust and foam inhibiting and offers excellent
extreme pressure properties. Aquagear
EP
Aquagear
EP
series consists of multigrade, extreme pressure industrial type gear
lubricants. It is specially formulated to perform in gear drive units
where rusting, due to severe water contamination is a problem. Aquagear
products have the ability to absorb free standing water so that
equipment continues to get the proper lubrication. For
information on the safe handling and use of these products, please refer
to the U.S.
Material Safety Data Sheets. For additional information and
availability of product, please call 1-800-782-7852. At
the finish line, when his car is a blur, you can clearly see why Robert
Yates builds his engines using our cutting fluids.
Champion
NASCAR engine builder Robert Yates knows that in race cars, you get out
what you put in. And considering the results he usually gets, it's
obvious that he puts in the best. Texaco
features a complete line of outstanding products suitable for a wide
variety of applications in the manufacturing industry. These products
meet or exceed most OEM and industry requirements for their intended
uses.
Cleartex
and Cleartex CF Cutting Oils
Cleartex
and Cleartex CF cutting oils
are tri-purpose, anti-mist, metalworking oils that can be used as
cutting oils, machine tool lubricants and hydraulic fluids. They offer
superior protection against rust and oxidation. The CF series offers the
same high performance, and is chlorine-free. Transultex
and Transultex CF Cutting Oils
Transultex
and Transultex CF
are light colored, anti-mist, active sulfur cutting oils designed for
use in moderate to severe machining operations. Transultex CF series is
chlorine-free. Sultex
Cutting Oil
Sultex
Cutting oils
are dark colored, heavy duty, active sulfur cutting oils. Sultex
oils are designed for tough machining operation such as:
Way
Lubricants
Way
Lubricants
are premium products designed for machine tools and other types of
equipment slides and ways requiring tacky, non-corrosive products having
extreme pressure properties. Starplex
Greases
Starplex
greases
are premium lithium complex soap, multipurpose, extreme-pressure (EP)
greases compounded with a highly refined paraffinic base oil. They are
designed for heavy duty equipment and automotive uses. In
service Starplex greases provide:
EDM
Fluid
EDM
Fluid
is a high flash, low viscosity, oxidation resistant fluid that is
specifically formulated for use in electrical discharge machines. Almag
Oil
Almag
oil
is a light pale, transparent, low viscosity mineral oil that is
particularly well suited for machining and grinding of aluminum and
magnesium, and their alloys. Rando
HD
Rando
HD
is a premium grade, anti-wear hydraulic oil series. They are
specifically designed to contribute to the long life of hydraulic
equipment. In
service Rando HD provides:
Rando
HD meet or exceed leading manufacturers' hydraulic requirements. Hydra-Way
32 Oil
Hydra-Way
32 oil
is a slideway oil specially designed for machine systems using a common
lubricant sump. Hydra-Way 32 oil offers the perfect combination of
hydraulic and way lubricants. Meropa
Lubricants
Meropa
lubricants
are industrial gear lubricants that work hard in enclosed gear boxes and
in many circulating systems to resist thickening caused by high
temperatures. Meropa is rust and foam inhibiting and offers excellent
extreme pressure properties. Soluble
Oils
Soluble
oils
offers excellent cooling lubricity and rust protection for use in a wide
range of grinding and machining operations. For information on the safe handling and use of these products, please refer to the U.S. Material Safety Data Sheets.Email
the Web Master Designed By Onsite PC
|
